MobiLinQ
Mobile Knowledge offers comprehensive support and Software Development Kits to third party application developers seeking to leverage the power of our in-vehicle computing platforms for their own vertical market applications. The revolutionary MobiLinQ platform is a Linux based communications hub that interconnects modern mobile computing platforms and traditional wired peripherals.
MobiLinQ provides GPS, WiFi, discreet peripheral connectivity, 3 RS-232 ports, CAN Bus, Ethernet, 4 USB ports, tablet charging, conditioned DC power, ethernet and a host of other integrated facilities to complement your mobile application. MobiLinQ is also available with Java.
MobiLinQ is a Linux based, central communications platform specifically designed for in-vehicle installation. MobiLinQ is all about choice!
Choosing the best peripherals to meet your specific business requirements. Whether Discreet or Smart Taximeters, Roof Lights, Driver Panic Button, Rear Seat Point of Sale, Passenger Information Monitors, Printers, Cameras, Accelerometers, Seat Sensors, Vehicle Data Bus, or 3G/4G USB modems, MobiLinQ offers it all, while connecting wirelessly to an Android Smartphone or Tablet.
An integrated WiFi router within MobiLinQ turns your vehicle into a mobile hotspot, allowing for wireless connectivity between the driver’s Smartphone or Tablet and offering the driver freedom to take the mobile device with them (up to 100 meters).
Installation of MobiLinQ is straight forward. The small enclosure can be mounted discreetly under the dash, seat, or in the trunk of the vehicle, out of the way of the driver but easily accessible to the vehicle technician. MobiLinQ has the ability to provide regulated power to connected peripherals, simplifying the installation process and providing greater control and protection over your equipment.
Even without a connected Smartphone or 3G Tablet, the GPS equipped MobiLinQ can connect with a 3G/4G USB modem, providing real time Vehicle Tracking, Status Monitoring, Point of Sale processing (additional POS equipment required), and even driver distress annunciation. MobiLinQ also offers a CAN Bus interface for on-board vehicle diagnostics via the OBD-II port.
MobiLinQ bridges the gap between the latest Android Smartphones or Tablets and conventional RS-232, USB, and Discreet technologies while delivering a host of new capabilities for mobile applications.
Electronics
Processor
- Freescale MCIMX286CVM4B (ARM926EJ-S)
Memory
- 1Gb DDRII SDRAM
- 4GB Flash
Operating System
- Linux Embedded
GPS
- U-Blox6, 50 Channel GPS Receiver w/ Antenna Supervisor
- WAAS, MSAS, EGNOS
WiFi
- Wi2Wi WLAN 802.11b/g w/ Mobile Embedded Hotspot
USB Hub
- Embedded 4 Port USB Host HUB w/ High Current Supply (1x2A, 3x1A)
Ethernet
- 100Base-TX
- 10BASE-T compatible
Serial
- 3x 5-Wire RS-232
- 1x 3-Wire RS-485/232
CAN
- 2.0B protocol Controller Area Network interface
- OBD-II cable (optional)
Discrete I/O
Inputs
- 1x Vehicle Ignition Sense
- 1x Emergency/Panic (Contact source input)
- 1x Opto-Coupled Sense Circuit (High-side/Low-Side configurable)
- 1x Odometer/Pulse Counter
- 3x Discrete Logic Inputs
Outputs
- 1x High Current (Open Drain, 1A)
- 1x Low Current (Open Collector, 100mA) / Optional pulse generator
Peripheral Power Supplies
- 5V DC 1.5A
- 7/9/12V DC 2A (Selectable)
- Switched Vehicle Supply 1.5A
- Versatile detachable screw type terminal block
Mechanical
- Height: 1.5”, 3.8 cm
- Width 7.5”, 19.0 cm
- Depth: 5.0”, 12.7 cm
- Weight: 1.65 lb, 0.7 kg
Electrical
Input Voltage
- Operates from within a DC range of 9V to 32V
Power Consumption
- 250mA nominal@ 12VDC (no peripherals)
Environmental
- Operational: -20 to +70 degrees Centigrade
- Storage: -30 to + 80 degrees Centigrade
- Humidity: 95% Non-condensing
Certifications
FCC
- Part 15 Class A.
CE
- EN 301-489-1 V1.9.2
- EN 301-489-17 V2.1.1
- EN 60950-1:2010 +A11:2009 +A1:2010
RoHS
- MobiLinQ is RoHS compliant.
Mobile Knowledge offers comprehensive support and Software Development Kits to third party application developers seeking to leverage the power of our in-vehicle computing platforms for their own vertical market applications. The revolutionary MobiLinQ platform is a Linux based communications hub that interconnects modern mobile computing platforms and traditional wired peripherals.
MobiLinQ
MobiLinQ provides GPS, WiFi, discreet peripheral connectivity, 3 RS-232 ports, CAN Bus, Ethernet, 4 USB ports, tablet charging, conditioned DC power, ethernet and a host of other integrated facilities to complement your mobile application. MobiLinQ is also available with Java.
To learn more about how Mobile Knowledge can assist you. |